Relied on by
packs past the warranty line show up, whatever the manufacturer's figure says
manufacturers compared on health you measured yourself
the batteries you will need to replace, and what they will cost
Advanced analysis is the state of health part of Qera Battery Intelligence. It computes the true state of health (SoH) of every pack from raw voltage and current, and the remaining energy from the battery's raw signals. It ranks your models by health, shows how health changes with age, and finds the replacement window for each pack.
True SoH from raw voltage and current
True SoH computed from raw voltage and current, calibrated for LFP and every major NMC variant. It is worked out independently of the manufacturer's estimate. Each vehicle shows its SoH since the battery entered service.
The usable energy in every pack
True remaining capacity, calculated from the battery's own raw signals rather than the manufacturer's display. Each vehicle shows the usable energy it has now, in kWh, next to what it had when new. A state of charge you can trust to the last kilometre.
Rank your models by state of health
Every model in the fleet on one scale, with its chemistry, its average SoH and the spread across its vehicles. Open a model to see its vehicles, or list the whole fleet in three SoH bands: 90% and above, 80 to 90%, and below 80%. Any view can be exported as CSV.
Benchmark degradation across manufacturers
See how state of health changes with age or by calendar year, for the whole fleet or for one manufacturer or model. The chart shows the fleet average, the range where most vehicles sit, and the 90% warning and 80% warranty lines. Highlight one vehicle to compare it with the rest, and see which vehicles are losing SoH fastest each year.
Plan replacements 5 to 10 years ahead
The replacement window for each pack, found by detecting the knee point where degradation starts accelerating. The dashboard counts the batteries that reach end of life each quarter, and what replacing them will cost, so finance can put each replacement into a 5 to 10 year capital plan.
Frequently asked questions
How is your state of health different from the one our BMS shows?
The BMS figure is calculated by the battery supplier, and you cannot check the calculation. We compute SoH from raw voltage and current, calibrated to the chemistry in each pack. We also keep the full history when the onboard system is reset.
Can we compare manufacturers and models?
Yes. Every vehicle is measured the same way, so models from different manufacturers sit on one scale. You can see which models hold their health best and which vehicles are losing SoH fastest.
What does remaining energy mean?
The usable energy left in the pack, in kWh, worked out from the battery's raw signals. It shows how much of its original capacity the vehicle can still use today.
Which battery chemistries do you support?
LFP and all major NMC variants, including 811, 622, 532 and 111. We calibrate the analysis to each one.
Can we export the analysis?
Yes, at fleet, model or vehicle level, as CSV.
How long before we see anything?
State of health and remaining energy start the day the telemetry connects. Trends and replacement windows need history, so the forecast gets more precise the longer a vehicle is on the platform. Connecting new vehicles on day one gives you the longest history.
Explore Qera Battery Intelligence
Operational control
Real-time charge and health, online pack monitoring, safety alerts, a live map and depot overview, across all your depots and makes.
Assets & compliance
Track mileage, energy throughput and degradation against contract thresholds to build the independent evidence behind your warranty claims.