Your battery data is calculated and held by the manufacturer, and you can't check it. To get the raw signals yourself, write them into the purchase contract, stream them continuously, and keep your own copy. With your own data, you can plan around what each battery can really do, spot wear before it takes a vehicle out of operation, and back a warranty claim with records the manufacturer didn’t produce.
Not many operators we talk to can tell you the state of health of every vehicle they run. Far fewer can tell you how that number was worked out. The manufacturer calculated it, and nobody outside the manufacturer can check it.
That would matter less if the battery were a small part of the vehicle. It's the most expensive part to replace, and its data tells you whether it can do the work you've planned for it and whether a warranty claim would hold.
Your growing electric fleet empowers you to make data-driven operational and strategic decisions. Modern electric vehicles are essentially computers on wheels, generating vast amounts of valuable data
In this post, we explore how to manage data effectively, identify key metrics, and highlight the critical benefits of owning independent, real-time data.
Reliability is the single biggest challenge in managing an electric fleet, and it depends on knowing what each battery can really do. For that you need the raw signals, straight from the vehicle. With them you can follow:
- State of charge
- Accurate range prediction
- State of health
- Safety & thermal diagnostics
- Operational efficiency metrics
- Warranty tracking
Not just summary figures on a dashboard or in a manufacturer's portal, but raw data directly from the vehicle.
Getting them takes three steps, and each one is easier to do early than late.
Enlarge
Step 1
Secure the raw data in the purchase contract
Mandate raw-data access directly in your purchase contracts before taking delivery. While you may have legal entitlements to this data, OEMs do not always provide straightforward access by default. Explicit contractual agreement prevents costly friction later.
Ask for the raw signals
We've seen a manufacturer's portal show batteries as still within warranty while independent measurements showed they had already dropped below the level the warranty guaranteed. Without your own record, you wouldn't know, and you couldn't prove it
Under the EU Data Act (Regulation (EU) 2023/2854), rights concerning connected device data are explicitly protected under Chapter II:
Key Regulatory Articles
- Article 3 (Access by Design) mandates that connected products and related services be designed so generated data is, by default, easily, securely, and directly accessible in a structured, machine-readable format.
- Article 4 (Right to Access Data) requires data holders (OEMs) to make generated product data available to users without undue delay, free of charge, and where applicable, in real time.
- Article 5 (Right to Share with Third Parties) grants users the right to authorize OEMs to share generated data directly with third-party service providers and analytics platforms.
Data Access & Control vs. Legal Ownership
The EU Data Act intentionally avoids creating an IP-like legal "ownership" over raw data. Instead, it establishes enforceable rights to access, use, and control generated data:
-
User Definition (Article 2(12)): Defines a user as any natural or legal person owning, renting, or leasing a connected product.
- Co-Generation Principle (Recital 6): Recognizes users as co-generators of device data, prohibiting OEMs from locking this data behind proprietary barriers or paywalls.
Ultimately, purchasing or leasing an OEM vehicle grants you comprehensive rights to access and utilize the data it generates.
Tip
Include data access requirements in your initial tender specifications so data access is never treated as an afterthought during procurement.
Step 2
Stream the data continuously
If you’ve ever asked for a data export, you may know the routine. You send a request, wait, and receive a file that covers part of the period you needed. A file like that is fine for looking back on your fleets health. But it does not help you with continuous optimization.
So instead send the data from each vehicle to your own cloud storage as it's produced. Most vehicles can do this through the telematics unit they already carry. Where that unit can't deliver the signals you need, a dedicated unit for battery data can be added.
Be transparent with vendors regarding the exact data points and sampling frequencies you require. Comprehensive battery intelligence requires high-resolution raw data streams across essential metrics.
| # | Data signal | Accuracy | Sample rate |
|---|---|---|---|
| 1 | Voltage — battery system | 0,5 V | 0,5 s |
| 2 | Current — battery system | 0,5 A | 0,5 s |
| 3 | Technical SoC | 0,1 % | 60 s |
| 4 | Cell temperature (°C) | 0,1 °C | 10 s |
| 5 | Ambient temperature | 1 °C | 60 s |
| 6 | Voltage — parallel subsystems | 0,5 V | 0,5 s |
| 7 | Voltage — series subsystems | 0,1 V | 0,5 s |
| 8 | Voltage — cell level | 0,01 V | 0,5 s |
| 9 | Cumulative FCE |
Tip
Why your own data matters: the key metrics that decide warranty claims should never be calculated only by the party liable for those claims.
Step 3
Own your data infrastructure and share seamlessly
Store your fleet telemetry in scalable cloud storage designed for high-volume datasets. Ensure your platform supports secure API integration with specialized analytics tools and external solution providers while keeping you in full control of data access permissions.
For instance, route general vehicle diagnostics to maintenance systems while streaming battery data directly to advanced battery intelligence platforms like Qera.
Transforming raw vehicle and battery data into actionable insights will significantly optimize operational performance, drive strategic decision-making, and protect your fleet investments.
Tip
Make sure your data is reliable, compliant and secure. Check that it arrives complete and on time, that storage and sharing meet GDPR and your own data policies, and that you can see who has accessed it and when.
| # | Data signal | Accuracy | Sample rate |
|---|---|---|---|
| 1 | Voltage — battery system | 0,5 V | 0,5 s |
| 2 | Current — battery system | 0,5 A | 0,5 s |
| 3 | Technical SoC | 0,1 % | 60 s |
| 4 | Cell temperature (°C) | 0,1 °C | 10 s |
| 5 | Ambient temperature | 1 °C | 60 s |
| 6 | Voltage — parallel subsystems | 0,5 V | 0,5 s |
| 7 | Voltage — series subsystems | 0,1 V | 0,5 s |
| 8 | Voltage — cell level | 0,01 V | 0,5 s |
| 9 | Cumulative FCE |
The full data spec, as a PDF for your tender team
Get the spec
Is it worth the effort?
It takes some work. Someone has to write the contract clauses, and someone has to look after the data once it arrives. In our experience it's far less work than arguing a warranty claim without your own records.
Once the data is flowing, the next question is what to do with it. We cover that in our article on operational and strategic decisions.